Limited Edition: Desert Tan River Quiver
Limited Edition: Desert Tan River Quiver
Limited Edition: Desert Tan River Quiver
Limited Edition: Desert Tan River Quiver
Limited Edition: Desert Tan River Quiver
Limited Edition: Desert Tan River Quiver

Limited Edition: Desert Tan River Quiver

Regular price $949.99
/
Shipping calculated at checkout.

Length
Rod Capacity
Mount
Mounting Guide

Versatile mounting options make it possible to fit a River Quiver onto most vehicle crossbars.

 

Standard Mount

Standard Mount Specs

Mount Time: 15-25 Minutes

Added Total Height (including River Quiver Extrusions): 5”

Crossbars thicker than 1.5” require Extended Bolts (Sold Separately)

Crossbars that sit lower than average; < 1.5" from top of crossbar to top of roof may require Shorter Bolts (Sold Separately) - Common on earlier generation 4Runner and CRV.

Can be Secured with Locking Bolts (Sold Separately)

TOOLS REQUIRED:
Mini Ratchet OR 4mm Allen Key

-10mm Nut Driver

Best For:

  • Most Factory Vehicle Crossbars less than 1.5" thick & 3.5" wide.

  • Mounting configurations where overall height is not an issue.

  • Most cost-effective mount.

  • Reel Box Down mounting configurations on bars < 2" taller than top of roof. (see height guide below)

 

Low-Profile T-Track Mount

Low-Profile T-Track Mount Specs

Mount Time: 7 Minutes

Added Total Height (including River Quiver Extrusions): < 3"

Mounts Directly to any T-Track System

Secured with Unique Key Driver (Included)

*The included T-Track Hardware is 18mm Square, standard for most Yakima, Thule and similar platforms. Racks that utilize T-Track that is not 18mm square will require additional hardware not included and to be sourced directly from the rack manufacturer.

TOOLS REQUIRED:
Mini Ratchet OR 4mm Allen Key

-10mm Nut Driver

 

Best For:

  • Factory & Aftermarket Vehicle Crossbars with integrated T-Tracks.
  • Rhino-Rack Crossbars.
  • Overland Style Rooftop and Bed Racks.
  • Reel Box Up Mounting on Toyota 4Runners with aftermarket Overland racks (Prinsu, Sherpa, Etc).
  • Mounting below (hanging) a Rooftop Tent on a bed rack or taller roof rack.
  • The lowest possible River Quiver mounting solution on compatible racks.

 

Quick Release Mount

Quick Release Mount Specs

Mount Time: 3 Minutes (add a few minutes for initial setup)

Added Total Height (including River Quiver Extrusions): 4”

Quick and convenient Installation

Secured to Roof Rack With Lock and Key (Included)

2-Banger Set includes two mounts, one uniquely keyed and one locking blank.

4-Banger Set includes four mounts, two uniquely keyed and two locking blank.

TOOLS REQUIRED:
Mini Ratchet OR 4mm Allen Key

Best For:

  • The widest range of Factory & Aftermarket Vehicle Crossbar systems.
  • Lower profile mounting than Standard Mount.
  • Mounting scenarios where the River Quiver needs to be removed from the vehicle frequently.
  • Reel Box Up Mounting on Toyota 4Runners with factory or more traditional aftermarket racks (Yakima, Thule, etc).
  • End users who prefer the added security of a key locking mount.
  • Larger than average Vehicle Crossbar Systems. The rubberized stainless steel strap is highly adjustable and works with the most extreme range of bar shapes and thicknesses. 

 

Mounting Dimension Guide

  • Limited Lifetime Warranty
  • 30 Day Returns

The best-selling, #1 rated fly rod roof rack in the world is now available in a limited run in a new color: desert tan! Our advice to loyal customers or if you’re just thinking about getting your first River Quiver: make your decision quickly.

Once these are gone, they are gone!

  • Standard OR ShortCut Length River Quiver
  • Reel Box Pads
  • Rod Chairs
  • River Quiver Keys
  • Top and Bottom Coupler & Bolts
  • QR Card Installation Guide
  • Installation Multi-Tool
  • Length: 10'4 Standard or 5'2 ShortCut (Both accommodate rods up to 10'4")
  • Width: 2-Banger 8", 4-Banger 14.2”
  • Height: 7.4”
  • Height off Crossbar: 3 3/8" - 6" Depending on Mounts
  • Weight: 2-Banger 22 lbs, 4-Banger 44 lbs, 2-Banger ShortCut 15 lbs, 4-Banger ShortCut 25 lbs
  • Versatile Mounting Solutions
  • Holds rods up to 10' 4" length
  • Holds rods and reels up to 12 weight capacity
  • Lined with polypropylene liner to protect rods in transit
  • T-track on top and bottom of extrusion for mounting

River Quiver Design

Considered to be The Best Fly Rod Roof Rack on the Market. The River Quiver sports superior functionality and strength in all its details and at the same time conceals its technological superiority within a sophisticated exterior design. The River Quiver is understated, sleek and timeless. It compliments all vehicles from the roughest off-road truck to a shiny luxury SUV to a fleet of professional fly fishing guide or fishing outfitter vehicles.

Easy

Installation

Check out our complete user manual and installation videos to get get started

Learn More

FAQs

The River Quiver is designed to fit most commercial roof rack systems. In fact, Riversmith engineers haven’t yet found a commercial rack that doesn’t fit.We completed a thorough review of multiple brands and styles of rack to make sure there were no limitations with our product. If the height of crossbars is over 1 3/8” it will require extended bolts. 

Durability and quality were top priorities when developing the River Quiver. It is a product built to last - our engineers have made sure of it through endless testing. We are so sure of the quality and durability of this product that we offer the “Locked & Loaded” limited lifetime warranty free of charge; we want your customers to feel 100% comfortable transporting their gear with the River Quiver.

Mini Ratchet: Speeds installation of your River Quiver. Includes 4mm Hex Bit to install Mounting Bolts and Coupler Bolts. Also fits Mount Lock Key Bit to speed installation of Mount Lock.

10 mm Nut Driver: A 10mm Nut Driver is required to fasten the mounting bracket.

The spacer kit is available for configurations that require the River Quiver to be mounted higher than the standard mounts allow, such as a car with a spoiler or lift gate. This gives it additional space for the River Quiver to fit securely on the vehicle while not being intrusive. Most rear gates can be cleared without a spacer kit as long as you measure for installation with the gate open.

Our Standard Mount can be upgraded with custom locking bolts. This lock system consists of unique bolt heads and matching key. The mount lock further secures the River Quiver to a roof rack, providing additional peace of mind that your gear will stay where you left it. Additionally, the Quick Release Mounts do come with a unique keyed lock and the Low-Profile Mounts include security bolts for additional convenience and security when mounting your River Quiver.

Extended Mounting Bolts are used to fit larger than normal roof rack bars. If the height of crossbars is over 1 3/8” it will require extended bolts.  These bolts are an extended version of the standard mounting bolts that attach the River Quiver mounting bracket to your roof rack. They are 1'' longer in case you have installed a Spacer Kit with your River Quiver fly rod holder or have larger than normal crossbars. We also have the high-security version of the Locking Extended Mount Bolts.

You do need a roof rack with 2 crossbars to attach the River Quiver to your vehicle. If you own a pickup truck, cross bars are not required. Check our Truck Bed ShortCut here.

The short answer is yes, but it all depends on the cross-bar system you have on your vehicle. We have three different mounting options that will accommodate all different roof rack styles and your specific needs. To read more about these mounting options, please click here.

You can most definitely keep the River Quiver on year-round. We designed it to ensure you can have your rod rigged at the ready no matter the time of year you are fishing.

The River Quiver can accommodate spey/switch rods with a minor tweak to how the reel sits on the rod. Simply connect the reel on the back butt section with either a reel cover or rubber band. When you arrive at your fishing destination all you need to from here is to re-attach reel into the reel seat and you are off fishing.

Yes, most SUV's with a hatch require the River Quiver to be mounted with both brackets on rear half of the coupler. This is okay and does not affect the functionality of the unit.

Double Barrel

Tube Construction

Custom Designed

Aesthetics

The best-selling #1 rated fly rod roof rack in the world.

Not all rooftop fly rod holders are equal. River Quiver is the #1 choice of fishing guides, outfitters and retailers. These are professionals who fish every day and choose the best equipment available. Invest in the best, not necessarily the cheapest.

As fly fishers ourselves, we were not satisfied with the quality or functionality of roof rack fly rod holders that were available so we set out with our team of mechanical engineers to design and build a better fly rod holder for truck and car not just in some ways but in every way. From the basic and hugely important task of being hard to break into down to the smallest detail of fit & finish. And, oh yeah, it's all packaged in a sleek and sophisticated design that makes you and your rig look pro. The River Quiver line of fly fishing rod roof racks - burly strong, super functional and visually striking rooftop rod holders that are built to maximize your fishing and built to last.

Security

High-security tongue and groove joint makes it almost impossible to break or enter the reel box. Made with AES polymer, this design resists all attempts at destruction.

Ease of Use

Side-swing door with a unique “hold-open hinge” makes a huge difference to the functionality and enjoyment of owning the best fly fishing equipment you can buy.

Strength

Our design is able to withstand shock, wind &, impact loads while still being lighter to install and less load on your vehicle.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Don Hodgman
Quality Product

It ids exactly as described it the write up.